Technical Parameters Of GB6-180 Thick Material Sewing Machine

GB6-180 heavy duty sewing system related products: GB6-180 large heavy material

(leather sewing machine), FGB4-1M type sewing machine, FGB4-1B Quilt Sewing machine GN20 series carpet edge machine (carpet edge machine), GN20-3 wire rope edge machine.

GB6-180 thick material sewing machine adopts single straight needle, swing shuttle hook and up and down compound feeding, forming double line lock stitch, and equipped with back seam device to check whether the connection of main control panel to power board signal is reliable.

The special thick layer of O.7-1.1 cm is formed by the down stitching, and the needle and suture are not easy to form a good thread loop in this state, which leads to needle jumping.

It is suitable for sewing shoes, sofa, container bags, seat belts, tents, leather, quilts and other extremely thick articles.

Because the special upper and lower feeding mechanism and the presser foot cross lifting mechanism are adopted, the expansion bodies are sewn.

When the medium and thick material with larger latent capacity is used, the upper and lower layers can ensure the same feeding volume. When the high and low overlapped sewing and climbing sewing, the feeding is smooth, the stitch spacing is stable, and the stitches are smooth and beautiful.

Check whether there is a short circuit phenomenon between the lead wire and the rack by using the multimeter resistance file (resistance is 0): check each button magnet in turn and replace it, and the correct resistance should be 10 ohms.

The machine can be adjusted according to the special requirements of sewing process. The multimeter is used to measure the plug 4 in the control box connected to the outlet of the power board CZ6, and the AC voltage of the 5 pin should be 63V.

If not normal: remove the embroidery frame.

By using the principle of increasing the needle stroke, the hook line can be completed: the time between the needle and the hook is also changed. When the needle bar rises from the bottom dead point to the first line of the calibration, the check angle is checked to check whether the connecting line of the buckle magnet is reliably connected to the power board: the maintenance is made and the connection is reliable.

In order to achieve the expected difference between the feed quantity of the upper seam and the feed volume of the lower layer, the quality of the sewing and the sewing effect are obviously improved.

GB6-180 thick material sewing machine

Specifications: maximum sewing speed: 800 stitches /min; needle distance adjustment range: 12mm; presser foot lifting height: manual control 14mm; knee control 22mm; operating space: 200 x 420mm; machine needle type: GV2 type 110-280 (old 7 * 1 type 18-28); suture specification (left spin): wax line 25/3-18/7 shares; hemp thread 2 * 7 shares; nylon line 2-24; motor power: Motor: 3 phase, 380 volt, 380 kW; machine dimension: XXXX x 590mm.